Physical Interfaces
E1:
• Number of Ports: 16
• Bit Rate:
2.048 Mbps +/- 50 ppm
• Standards Compliancy:
ITU G.703, G.704, G.706, G.732
T1:
• Number of Ports: 16
• Bit Rate:
1.544 Mbps +/- 32 ppm
• Standards Compliancy:
ANSI T1.403, Telcordia TR-62411
Fast Ethernet:
• Number of Ports:
8 x 10/100BaseTx
• Standards Compliancy:
802.3 (Fixed settings, autonegotiation)
802.1Q/P
• Connectors:
10/100BaseTx -- RJ-45
Gigabit Ethernet:
• Number of Ports:
1x 1000BaseX
• Connectors:
GBIC SC
• Range:
Multimode – SX 550m
Single mode – LX 5Km
Power
Options
• DC Power:
• ±36 to ±72 VDC
Nominal: ±48, ±60 VDC
• ±18 to ±36 VDC
Nominal: ±24 VDC
• AC Power: 90 to 264 VAC
Nominal: 100 - 240 VAC
Supports 2 hot-swappable power supplies
(one redundant)
Power Consumption
• 80W
Physical Dimensions
•
Inches: 1 RU (h) x 13.8” (d) x 19” (w)
• cm: 1 RU (h) x 354 (d) x 48.26 (w)
* Please contact Axerra Networks
for availability.
** Please contact Axera Networks
for current
approval list
Note: This document is provided for
informational purposes only and may
be subject to change without notice.
|
|
T1/E1-based
Pseudo-Wire Services
T1/E1 CES:
• Framed (CESoPSN)
• n x DS0 (1=< n =< 31)
• Unframed (SAToP)
Frame Relay:
• One-toOne mode (per-DLCI encapsulation)
• Port mode
HDLC/PPP:
• Port mode
Ethernet
Services
• Bridging/forwarding between Ethernet interfaces
• 802.1Q/ 802.1P
• Port-based VLAN tagging
• Rate limiting (per port or per VLAN):
Up to 1 Mbps – 512 kbps steps
1 Mbps up to 100 Mbps – 1 Mbps steps
100 Mbps to 1000 Mbps – 10 Mbps steps
IP Services
IP Service Interworking -- Supported layer-2 circuits: FR, HDLC, PPP,
Ethernet 802.1Q
Software Specifications
Timing
• Adaptive Clock Recovery (ACR)
• High-Precision Clock Recovery (HPCR®)
• Internal ±25 ppm (non-HPCR)
• Loopback timing
QoS Management
• 4 Levels of Prioritized Queuing, WRR,
SP
• Layer 3 Marking – DiffServ
• Layer 2 Marking – VLAN 802.1Q/P Management
Specifications
• In-band or out-of-band
• SNMP
• Syslog
• Command Line Interface (RS-232 / Telnet / SSH2)
• AXNVision NMS
• Remote Software Upgrade
Environmental Specifications
• Operating temp: 0–50ºC / 32–104ºF
• Humidity: Up to 90% non-condensing
Regulatory Specifications**
• Safety: UL60950-1 CAN/CSA-C22.2,
EN60950-1
• EMC: FCC part 15-Class A, ETSI 300-386-2 Class A, VCCI Class
A
|
continued
from previous page
Back to Top