Physical Interfaces
E1 (User or Network):
• Number of Ports:
1 or 2 (ordering option)
• Bit Rate:
2.048 Mbps +/- 50 ppm
• Standards Compliancy:
ITU G.703, G.704, G.706, G.732
• Connectors:
Balanced RJ-45
BNC connectors via adapter cables
T1 (User or Network):
• Number of Ports:
1 or 2 (ordering option)
• Bit Rate:
1.544 Mbps +/- 32 ppm
• Standards Compliancy:
ANSI T1.403, Bellcore TR-62411
• Connectors:
Balanced RJ-45
V.35/RS-530 (User only):
• Number of Ports:
1 (ordering option – in addition to one T1/E1)
• Bit Rate:
n x 64 kbps up to 2.048 Mbps
• Connectors:
DB-25 female (DCE)
Ethernet (User and Network):
• Number of Ports: 2
1 10/100BaseTx (User LAN)
1 100BaseTx/Fx (Network)
• Standards Compliancy:
802.3u
802.1Q/P
• Connectors:
10/100BaseTx – RJ-45
100BaseFx – LC duplex
• Range:
Multimode – 2 km for 62.5µ
Single mode – 15 km for 9µ
Power Options
• DC Power: -18 to -72 VDC, 3A @ 48V
• AC Power: 100 to 240 VAC, 1.6A @ 100V
Physical Dimensions
•
Inches: 1 RU (h) x 9.4” (d) x 1/2 19” (w)
• cm: 4.45 (h) x 24 (d) x 20 (w)
Environmental Specifications
• Operating temp: -20 — 70ºC / -4 — 158ºF
• Humidity: 5% — 90% non-condensing
Regulatory Specifications**
• Safety: UL 1950, CE EN 60950
• EMC: FCC part 15-class A (USA),
EN55022A,
ETSI 300-386-2
* Please contact Axerra Networks
for availability.
** Please contact Axera Networks
for current
approval list
|
|
T1/E1-based Pseudo-Wire
Services
T1/E1 CESoPSN:
• Unstructured, structured, n x DS0
• Jitter buffer -- programmable up to
256 msec
Frame Relay:
•
One-to-One mode
• Port mode
HDLC/PPP:
• Port mode
Ethernet Services
• Ethernet Pseudo-Wire:
- One-to-One mode (Tagged interface)
- Port mode (Untagged interface)
• Bridging/Forwarding between LAN and network interfaces
• Pass-through mode
• Port-based VLAN tagging
• Rate limiting (per port or per VLAN):
Up to 1 Mbps – 512 kbps steps
1 Mbps up to 100 Mbps – 1 Mbps steps
Timing
• Adaptive Clock Recovery (ACR)
• High-Precision Clock Recovery (HPCR™) -- ordering
option
• Internal -- 32 ppm
• Loopback timing
QoS Management
• Dynamic bandwidth allocation between
voice and data
•
Layer 3 Marking – DiffServ
• Layer 2 Marking – VLAN 802.1Q/P
Management Specifications
• Protocols: Command Line Interface
(CLI) or SNMP
• Remote In-band
• Telnet
• AXNVision NMS (SNMP)
• Out-of-band
• Serial RS-232, DB9
|
continued
from previous page
Back to Top